Skip to content

Frequently Asked Questions

FAQ 3D Printing

Ready to dive into 3D printing? 🚀 Don't let technical questions hold you back! From choosing your printer to holding your first printed object, our articles are here to guide you every step of the way.

📖 Browse the full FAQ 🧰 Our calculators

📖 Explore our resources to become a 3D printing pro. 🤝 New: Makers Support! Have a question not covered here? Ask it below, with a photo if you'd like: our AI answers instantly, our team steps in if needed, and the best questions get added to this FAQ.

🧰 Our free calculators and tools

⭐ Most frequently asked questions

Quick diagnosis: which defect does your part have?

Click on the image that matches your part: you'll instantly get the 3 settings to adjust in your slicer (OrcaSlicer, Bambu Studio, PrusaSlicer, or Cura).

📷 Photos deliberately exaggerated to clearly show each defect.

Getting started with 3D printing

How does a 3D printer work?

It builds an object layer by layer from a digital file. On the most common models (FDM), a plastic filament is melted in a heated nozzle and deposited line by line; each layer bonds to the previous one. On resin printers, UV light hardens a photosensitive liquid layer by layer.

Learn more: FDM 3D printing explained and resin 3D printing.

Is it hard to get started if you know nothing about 3D printing?

Much less than it used to be. Modern printers self-calibrate, the build plate adjusts automatically, and software comes with ready-to-use profiles. In practice, you can print your first part the same day by using an existing file.

Our step-by-step guide: your first steps in 3D printing and the beginner's guide.

Is a 3D printer actually useful at home?

Absolutely, far beyond figurines: you can repair everyday objects (dishwasher wheel, clip, handle…) instead of throwing them away, make custom storage and brackets, and even learn CAD or sell small batches.

5 reasons in detail: why get into 3D printing today.

What budget do I need to get started?

Plan for between €200 and €400 for a reliable entry-level FDM printer, then €20–30 per kilogram spool of filament. Add a few small tools (spatula, wire cutter, adhesive): the rest comes with experience.

Detailed breakdown: budget for getting started.

How much does a 3D print cost?

For a PLA part, filament is the main cost: roughly 2 cents per gram with a spool at €20/kg. A 50 g part costs about €1, plus a few cents of electricity. Add a small margin for failed prints and machine wear if you want a complete cost breakdown.

Calculate it yourself: our print cost calculator.

How do I choose my first 3D printer?

Ask yourself three questions: what do you want to print (useful parts, fine figurines, multicolor objects?), maximum size, and how much time you want to spend on tuning. For a first purchase, a closed or semi-closed FDM printer with automatic calibration is the safest choice.

Our advice: 2026 buyer's guide, how to choose your 3D printer, and 3D printer brands.

All-in-one printer or open and repairable machine?

Turnkey machines (Bambu Lab or Creality K series) work out of the box with ready profiles and automatic color switching, but often depend on the cloud and proprietary parts. Open machines (Prusa, Voron, Klipper) are infinitely repairable and customizable, with no required account, though sometimes pricier upfront.

The comparison in our 2026 buyer's guide, and our take: Is Bambu Lab the undisputed leader?

Is advertised speed (600 mm/s…) a good criterion?

Not really: that speed is only reached on long straight lines. Instead, look at the machine's acceleration and nozzle throughput (in mm³/s), which determine real print time, plus vibration compensation (input shaping) that keeps parts clean at high speeds.

Read: what speed can you really expect? and how input shaping works.

FDM or resin: which technology should I choose?

FDM (filament) is versatile, clean, and affordable: ideal for everyday objects, mechanical parts, and décor. Resin offers superior detail (figurines, jewelry), but requires gloves, good ventilation, and post-print washing.

Full comparison: FDM vs resin.

From what age can you do 3D printing?

From age 8–10 with an adult nearby, on a closed printer with PLA. The nozzle and plate get hot: kids learn first not to put their hands in the machine during printing. It's a great way to learn geometry, design, and patience!

Read: what age to start 3D printing safely and 3D printing in schools.

How do I improve and learn?

Print small test models (cubes, bridges, overhangs), change one setting at a time and note what works. Maker communities and video tutorials do the rest.

Our guides: learn and master 3D printing.

3D Files and Software

Where can I find 3D files to print?

On sharing platforms like MakerWorld or Printables, which bring together millions of models, often free. Always check the license before using a model.

Our files are free: free 3D files from Le Monde du 3D. And the guide to all sites: the best 3D file platforms.

STL, 3MF, STEP: what's the difference?

STL describes only the shape of the object using triangles: it's the most common format. 3MF also preserves colors, settings, and multiple build plates in one file. STEP is a precise CAD format, handy for modifying a technical part.

Details: what is an STL file and STL or 3MF. And why switch to 3MF: STL's limits.

What is a slicer?

It's the software that slices your 3D model into layers and calculates the nozzle path. It transforms the file into instructions for the machine (G-code), and that's where you choose layer height, infill, supports, and speed.

Comparison: different slicers and which slicer to choose. All download links: our 3D Slicers page.

OrcaSlicer, Bambu Studio or PrusaSlicer: which should I pick?

All three are free and similar. Bambu Studio is simplest with a Bambu Lab printer, PrusaSlicer is the standard for Prusa. OrcaSlicer works with almost all brands (Bambu Lab, Prusa, Creality, Klipper machines…) and offers the best built-in calibration tools (flow, pressure advance, temperature), plus advanced features like Z Anti-Aliasing. A solid choice if you have multiple printers or like fine-tuning.

The comparison: Bambu Studio or OrcaSlicer, and all the latest updates: OrcaSlicer 2.4 and 2.5.

How do I create my own 3D models?

Start with simple browser-based software like Tinkercad, assembling shapes. For technical parts, move on to parametric software (FreeCAD, Fusion, OpenSCAD); for organic forms, digital sculpting.

Our guides: get started with Tinkercad, FreeCAD and model without being an expert. All free and paid software: our 3D Modeling Software page.

Can I scan an object to reprint it in 3D?

Yes: a 3D scanner captures an object's shape (a broken part, a figurine, a hard-to-find spare) and turns it into a 3D model. You often need to clean and repair the mesh before printing. Handheld scanners are becoming more affordable: Bambu Lab announced its first scanner, the S1, for November 2026.

Read: 3D scanning and 3D printing and the Bambu Lab S1 scanner.

My object is too large for my build plate, what do I do?

Split it into several pieces in the slicer or 3D software, ideally with tabs or magnets for assembly, then glue the parts together.

The method: split an STL file and which glue for large prints.

What objects should I print for Halloween or holidays?

Seasonal decorations are perfect for practice: ghosts, pumpkins, bats, cake toppers or luminaries. A phosphorescent PLA or translucent white PLA lit by an LED has great effect, and articulated models always impress.

Our ideas: 5 Halloween projects. And ready-to-print models in our free 3D files.

Can I sell what I print?

It depends on the file's license: many free models forbid commercial use. Characters, logos and brands are protected: reproducing them for sale is illegal without the rights holder's consent. Our free files are for personal use only; for commercial use, ask us for a license.

Read: 3D printing and intellectual property and selling on Vinted or Etsy. Before you start, do the math: the reality of micro-farm margins.

AI and 3D Design (CAD)

Can AI create a 3D model for me?

More and more. AI tools like Tripo AI or Meshy generate a 3D model from a simple description or image, ideal for a figurine or decorative object. For a precise technical part, the result still needs CAD tweaks, but AI already saves a lot of time.

Read: AI-assisted modeling, Meshy AI and Bambu Lab MakerLab AI tools.

👉 AI or CAD, who wins? Will AI kill 3D modeling?

What is Tripo AI and how do I try it?

Tripo AI is one of the most popular 3D model generators for makers. From a description, photo or sketch, it creates a textured model in seconds, exportable as STL or 3MF for printing. Its new version, Agentic Canvas, lets you edit a specific area of the model without starting over. We used it to create Stan, our 3D mascot.

To try Pro and Max subscriptions, our partner code TRIPOSPARK offers 60% off for new subscribers until December 31, 2026: studio.tripo3d.ai.

Our articles: the Tripo AI guide, our test from drawing to figurine, Tripo Agentic Canvas and creating Stan.

How do I write a good prompt to generate a 3D model with AI?

Structure it in five parts: precise subject, details (pose, materials, accessories), style (realistic, cartoon, low-poly…), printing constraints ("single mesh", "watertight", "flat base", "no floating parts") and target size to match detail fineness. Prefer compact poses and thick shapes, and always check scale in the slicer: generators don't respect millimeter dimensions.

The guide with copy-paste examples: write the perfect prompt to model in 3D.

Is an AI-generated 3D model directly printable?

Often, but not always. Recent generators (Tripo AI, Meshy…) produce cleaner and cleaner meshes: for a figurine or decorative object, the slicer's "Repair" function usually fixes small holes. However, AI can't yet produce precise mechanical parts (gears, threads, snap fits): for that, CAD is still essential.

The guide: from photo to printable 3D file with Tripo AI, and our test of Tripo Agentic Canvas.

Can I turn a photo into a 3D figurine?

Yes. Tools like PrintU on MakerWorld or Tripo AI create a printable figurine from a photo in minutes, no modeling knowledge needed. The result is stylized but perfect for a gift or personalized decoration.

Step-by-step: create your 3D figurine with PrintU and our test: from 2D image to figurine with Tripo AI.

CAD, modeling, 3D sculpting: what's the difference?

CAD (computer-aided design) is for drawing precise, dimensioned parts: supports, enclosures, spare parts. Modeling and 3D sculpting work with freeform shapes: characters, figurines, decoration. For a part that must fit to a tenth of a millimeter, choose CAD; for a figurine, choose sculpting.

Read: FreeCAD, Blender and 3D printing and Nomad Sculpt.

Which CAD software should I pick as a beginner?

For your first parts, Tinkercad is ideal: free, in-browser, you assemble simple shapes. Next, FreeCAD (free and open-source) or Fusion (free for personal use) let you design real technical parts with dimensions and constraints.

Our guides: get started with Tinkercad and model without being an expert. All free and paid software: our 3D Modeling Software page.

What is parametric modeling?

It's a design approach where every dimension is a changeable parameter. You adjust the width of a support or the diameter of a hole, and the whole part recalculates automatically. Very handy for making a part in several sizes or tweaking it after a first print.

Read more: OpenSCAD, parametric modeling through code.

Can an AI like Claude draw CAD parts?

Yes, it's one of the big new features: connected to CAD software like Fusion, an AI assistant can create or modify a part based on a written request ("a 40 mm bracket with two screw holes"). You always need to verify dimensions before printing, but it's a huge time-saver for simple parts.

Read more: Claude + Autodesk Fusion, ultra-light parts designed by AI and our feature on Text-to-CAD.

Can AI help during printing?

Yes: newer printers use cameras and sensors with AI to detect a failed first layer, a warped object or "spaghetti," and pause the print before wasting filament. In print farms, AI also helps organize and monitor dozens of machines. The most advanced systems go further: they adjust flow, temperature or the next layer in real-time, without stopping the print.

Read more: AI, your 3D printer's copilot, real-time auto-correction and embedded AI: gimmick or real safety?

At which stages of 3D printing does AI step in?

At almost every stage: to design the printer (lightweighting through generative design, auto-calibration), to model (generating models from text or photos, Text-to-CAD), to prepare the file in the slicer (orientation, targeted supports, alerts) and to monitor printing (first layer control, incident detection). Maker know-how remains essential for material choice and dimension verification.

The full picture: AI at every stage of 3D printing.

Filaments and materials

Need help choosing? Check the needs of your part: our selector compares 12 filaments and tells you the right one.

Open the filament selector
How do I know if I have enough filament left on a spool?

Weigh the opened spool, subtract the weight of the empty spool (about 250 g for Bambu Lab, 140 g for a Polymaker cardboard spool…), and compare with the weight requested by your slicer, keeping a 10% margin for purges and priming.

Our calculator does the math for you, in grams and meters: filament remaining estimator.

What filament should I choose to get started?

PLA: it prints at low temperature, barely warps, has no strong odor and comes in hundreds of colors and finishes. It's the right choice for 80% of projects.

Why it's so popular: PLA, the most used 3D filament. Full overview: the world of 3D filaments. For a specific project, follow our practical guide or try our filament selector.

PLA or PETG: which one to pick?

PLA is the simplest and most precise, but it softens around 55-60 °C (watch out for a car in direct sunlight). PETG resists heat, impacts and outdoor conditions better, at the cost of a bit more stringing during printing.

The comparison: PLA vs PETG.

Still unsure? Compare them in our filament selector.

What material for a solid or heat-resistant part?

For a mechanical part, think PETG, ABS/ASA or nylon, possibly reinforced with carbon fiber. For outdoor use, ASA resists UV very well. For a flexible part (gasket, shell), choose TPU.

Our guides: filament for solid parts, filament strength and printing TPU and technical materials (carbon, ASA, PC).

Check "heat" and "impacts" in our filament comparator to see the ranking.

What filament for a part that stays outside or in a car?

ASA. It doesn't fear UV (it doesn't yellow and doesn't become brittle in the sun, unlike ABS), nor the heat of a cabin in the middle of summer (it holds up to 95-100 °C, when PLA softens at 55 °C), nor rain or frost. It prints around 240-260 °C, ideally in a closed printer.

Everything you need to know: ASA filament, champion of outdoor use.

To compare with other materials, try our interactive selector.

Can you print a flexible, airtight part in TPU?

Yes, it's the basis of soft robotics (pneumatic grippers, bellows, gaskets). You need a Direct Drive extruder, adapted TPU (95A to start, 85A for more flexibility), at least 4 to 6 walls, slightly increased flow and a fairly high temperature. For lasting air-tightness, flexible varnish or liquid latex on the walls is most reliable.

The complete guide: soft robotics in 3D printing.

Is cheap filament a good idea?

For prototypes, utility items or large parts with a large nozzle, yes. For precise, strong parts or printed very fast, a branded filament is better: more consistent diameter, higher quality plastic, better dried and wound spool. In any case, measure the diameter of a new spool and dry it if it shows bubbles or stringing.

The comparison: budget filament, good or bad deal? and our test of an economical brand: Deeplee filament.

Which filament brand should I choose?

For maximum precision, Prusament is the reference. Polymaker and Bambu Lab offer very consistent quality (and automatic recognition in the AMS for Bambu Lab). To print a lot on a tight budget, Sunlu, Elegoo and eSUN are good choices. And for "made in France," think Francofil. In any case, choose the right material first, then the brand.

Our ranking: best 3D filament brands.

1.75 mm or 2.85 mm: which diameter to buy?

The one your printer accepts, it's listed in its technical sheet. Today, the vast majority of machines use 1.75 mm, which also offers the widest choice of materials.

Explanation: 1.75 mm vs 2.85 mm.

How to store and dry filament?

Filament absorbs moisture from the air: it becomes brittle and causes bubbles, stringing and rough surface. Store your spools in an airtight box or vacuum bag with desiccant, and dry them in a dryer or dehydrator if they've absorbed moisture, especially PETG, TPU and nylon (your kitchen oven is too imprecise). The right settings by material: drying parameter selector.

Read more: should you dry 3D printing filament and storing filament under vacuum.

Do you need to change the nozzle for carbon or glow-in-the-dark filaments?

Yes. Reinforced filaments (carbon or glass fiber, metal, wood, glow-in-the-dark) wear out a brass nozzle very quickly: the hole widens and quality degrades without warning. Switch to a hardened steel nozzle, or tungsten carbide if you print a lot of them: it wears much less and heats almost as well as brass.

The comparison: brass, hardened steel, ruby or tungsten carbide.

Can you put a cardboard spool in an AMS?

Yes, but it's not ideal. In motorized multi-filament systems (Bambu Lab AMS, Anycubic ACE Pro, Creality CFS), the cardboard frays, creates dust that makes rollers slip, and a warped or too-light spool can jump. The solution: print clips to snap onto the edges, or better yet, switch to spoolless cartridges mounted on a reusable spool (MasterSpool).

The comparison: cardboard spools, cartridges and MasterSpool.

Are "High-Speed" filaments really worth it?

Yes, if your printer regularly exceeds 200 to 300 mm/s. At these speeds, standard filament doesn't have time to melt completely: under-extrusion, dull surface and layers peeling off. High-Speed versions (PLA HS, Hyper PLA, PETG High-Flow…) melt faster and set quickly as they exit the nozzle. On a slower printer, standard filament is enough.

Read more: High-Speed filaments, marketing or revolution? and filament, the bottleneck of high-speed printing.

The "fast printing" criterion is available in our filament selector.

Can you print objects for food use?

Yes, but with caution. Some filaments (PLA, PETG) are certified for food contact under EU regulation 10/2011, but this certification concerns raw material, not the printed part. Three risks are added by printing:

  • Layer lines form tiny crevices where bacteria settle and resist washing.
  • Dyes and additives (glitter, silk effect, marble…) are not always certified, even if the base is.
  • The brass nozzle, standard on most printers, may contain trace amounts of lead.

Best practices:

  • choose a filament certified for food contact, preferably natural or white;
  • print with a stainless steel nozzle, clean and dedicated to this use;
  • reserve the part for brief contact with dry foods or paste: cookie cutters, cookie stamps, dusting stencils;
  • wash by hand with warm soapy water, never in the dishwasher: PLA warps at 55-60 °C;
  • avoid repeated or prolonged use: glasses, bottles, storage boxes, cooking utensils;
  • replace it as soon as it's scratched or damaged.

For a truly smooth and food-safe surface, some makers apply food-grade epoxy varnish. To compare materials, try our filament selector.

Example: print your cookie cutters, and all our hygiene tips (plastic wrap, washing, cold dough) in free 3D cookie cutters.

Is 3D printing eco-friendly?

It allows on-demand manufacturing in the right place with no stock, and repair instead of replacement. PLA is plant-based, but only composts under industrial conditions. The most effective approach is still to avoid failed prints, limit supports, and recycle your scraps.

Read more: is PLA eco-friendly? and recycling your 3D printing scraps. To go further: make new filament spools from your scraps.

What do I do with my filament spool ends?

Several options: combine leftover scraps of the same material on hidden parts (storage boxes, shims), print small models of 3 to 40 g (filament clips, hooks, keychains), or splice spool ends together to make a new spool. Also remember to trim the bent end of your filament before you run out, especially with an AMS or CFS.

All our tips: smart ways to use your spool ends.

Is it worth buying a shredder and extruder to recycle my scraps?

Rarely for hobby use with PLA: with just a few kilos printed per month, savings are only a few dollars, and it often takes years to break even on equipment costing over $1,000. The math changes with large volumes (print farm) or expensive engineering filaments (nylon, PC). Recycling remains mainly an environmental choice.

Do the math with our recycling ROI calculator.

Settings and print quality

🩺 Got a defect on your part? Try our visual diagnostic: click the photo that matches and get the 3 settings to adjust.

My first layer won't stick to the build plate—what do I do?

It's issue #1. In order: clean the build plate (soapy water or isopropyl alcohol, don't touch the surface with your fingers), check leveling and first-layer height, slow it down, and raise the bed temperature slightly. A thin layer of glue stick can help.

All solutions: improve first-layer adhesion, choose the right build plate, and clean your build plate: IPA or dish soap.

My parts are peeling at the corners (warping)?

Plastic shrinks as it cools and pulls at the edges. Print in a closed enclosure or away from drafts, add a brim, and for ABS or ASA, heat the bed more.

Our comparison: beat the warping.

There are strings between parts of my object (stringing)?

These "spider webs" come from filament oozing during travel moves. Lower the temperature slightly, adjust retraction, and very often: dry your filament—humidity is a frequent culprit.

The method: eliminate stringing and find the right temperature.

Why are my parts and holes too small?

Because of shrinkage: plastic shrinks as it cools, especially in width (X and Y), and a bit more for ABS or nylon than PLA. Holes come out even smaller. No need to adjust your printer settings: fix it in the slicer with filament shrinkage compensation and X-Y hole compensation.

The method and calculator: dimensional tolerances in 3D printing.

What clearance should I leave so two parts fit together?

It depends on your printer and filament, but generally: about 0.1 mm for a tight fit that holds without glue, 0.2 to 0.3 mm for a sliding part (drawer, lid), and 0.4 to 0.5 mm for a freely rotating shaft. Round holes often need more clearance than square shapes. The safest way is to measure it once with a tolerance cube.

The guide and free file: the tolerance cube and its test key.

When do you need supports?

Whenever a part is "floating" or too angled, generally beyond 45 to 50°. Smart part orientation often lets you use fewer supports. Tree supports are easier to remove and save material.

Explanation: why supports are needed and find your ideal support angle. What happens when you skip them: the art of denial at 75°.

What infill should I choose?

For decorative objects, 10 to 15% is enough. For functional parts, 20 to 40%. More walls (3 or 4 perimeters) often reinforce better than high infill. The pattern matters too: gyroid is a good strength-to-weight balance.

All patterns: different infill types. And if your part snaps clean between layers, it's often an orientation issue: stop parts from snapping clean.

How long does a print take?

From a few minutes for a keychain to dozens of hours for a large part. Time depends on size, layer height, infill, and machine speed. The slicer estimates it before you print.

To save time: choose your print speed and the right nozzle size. To estimate time saved with a larger nozzle: our nozzle converter.

My print failed: how do I find the cause?

Look at where and when the problem appears: first layer (bed), shifted layers (belts, speed), holes or under-extrusion (clogged nozzle, wet filament), strings (temperature, retraction). Fix one thing at a time.

Our diagnostic guide: diagnose and fix errors and the XYZ calibration cube. Most common pitfalls: 5 mistakes to avoid.

Multicolor and finishing

How do I print in multiple colors?

Three options: swap filament spools at a given height (simple, for colored layers), use multicolor filament, or a multi-spool system that automatically switches filament during printing for truly multicolor objects.

Learn more: multicolor 3D printing and the purge tower.

What's a tool changer?

It's a printer with multiple complete print heads that switches between them during printing. Each color or material has its own nozzle: almost no purge needed, so less waste and faster color changes, and you can mix very different materials (PLA and soluble support, soft TPU and rigid part). It costs more than a standard multi-spool system, but much more effective.

Read more: Bambu Lab H3C with 9 heads, upcoming Bambu Lab P3C, and Snapmaker U1.

How do I make my prints look better (sanding, painting)?

Sand progressively (120 grit then 240, 400…), apply primer surfacer to hide layer lines, then paint with acrylic or spray paint. A final coat of varnish protects everything.

Our guides: which paints to use, which spray to choose, paint a figurine like a pro, and fine details with markers.

Can you smooth a 3D print with solvent?

Yes, it's called chemical smoothing: solvent vapor melts the surface and erases layer lines. The safest is PVB smoothed with isopropyl alcohol. Classic ABS + acetone works great, but the vapors are very flammable: use a closed box, no heat or sparks, open to outside, gloves and mask. PETG doesn't smooth well: better to sand and varnish.

Complete guide: chemical smoothing safely.

How do I assemble multiple parts solidly?

Cyanoacrylate glue for PLA, heat-set threaded inserts for screw assembly without damage, or parts designed to snap together. Some parts even print already articulated (print-in-place).

Read more: threaded inserts and print-in-place.

Safety and maintenance

Is 3D printing dangerous for your health?

Risks are low if you follow good habits: print in a well-ventilated room (not a bedroom), prefer a closed machine with filter for ABS and ASA, wear gloves with resin, and never leave a printer running unattended for long.

Full details: understand and manage the risks and filter your workshop air (HEPA, activated charcoal).

How much power does a 3D printer consume?

Much less than you'd think: an FDM printer typically consumes between 50 and 150 W during printing, with the heated bed taking up most of that. A print lasting several hours usually costs just a few cents in electricity.

Our measurements: how much power a 3D printer really uses, and calculate the exact cost of your parts with our calculator.

How do I maintain my printer?

Clean the build plate regularly, dust off the machine, check belt tension, lubricate the axes according to the manufacturer, and monitor nozzle wear, especially with filled filaments.

Our routine: how to properly maintain your 3D printer and which lubricant to use.

Le Monde du 3D

3D printing or plastic injection: what to choose for a production run?

It depends on quantity. Injection requires a mold that costs anywhere from a few thousand to tens of thousands of euros: it becomes profitable for large runs. For a prototype, a one-off part, or a series of a few dozen to a few thousand pieces, 3D printing is often more economical and much faster, with no mold or inventory. This is the model driving the growth of print farms.

Read more: 3D print farms vs. plastic injection. For your project, request a quote.

Who is Le Monde du 3D?

Le Monde du 3D is a French company specializing in 3D printing and emerging technologies, operated by GUIGOUT SAS. Our workshop is located in Bourg-en-Bresse, in the Ain department (01). We freely share 3D files, publish articles to help makers, and print parts on demand for individuals and professionals.

Learn more: about us and on-demand 3D printing.

Tour our site: all our sections and tools.

Why do you also cover AI and robotics?

Because these three fields work together: AI designs and optimizes, robotics acts in the real world, and 3D printing manufactures parts in a few hours. Combined, they put creative capability in the hands of makers and small workshops that was once reserved for industry.

Our vision in detail: the three pillars of creative autonomy.

Are your 3D files really free?

Yes. Our models are hosted on MakerWorld: all you need is a free account to download them. They're for personal use only; for commercial use, contact us for a license.

See all models: free 3D files. 👉 Ideas: our free files for your gifts.

Can I sell objects printed from your files?

No: our files are free for personal use only. You may not resell them, share them on other platforms, or sell the printed objects. For professional or commercial use, request a commercial license from us: we review each request.

Read more: 3D printing and intellectual property.

How do I request a quote?

Click on "Request a free quote": our assistant asks you a few questions (your project, quantity, dimensions, material), lets you attach a photo or 3D file, then sends your request to us. You'll receive a copy by email and we'll respond within 48 business hours. The quote is free and without obligation.

All the details: on-demand 3D printing.

What file formats can I send with my request?

STL, STEP, 3MF, OBJ, F3D, DXF, SVG, ZIP, PDF or a simple photo (JPG, PNG, WebP), up to 25 MB per file. No 3D file? A photo with a ruler next to the object, or a dimensioned sketch, is often enough to get started.

What materials do you use?

Primarily bio-based materials (made from corn, beet, or wheat starch), food-contact compliant for cookie cutters and stamps. For technical parts, we use PETG, ABS, ASA, or TPU depending on the part's application.

Read more: ASA filament and PLA or PETG.

Can you remake a broken or unavailable part?

Yes. Send us a photo of the part and a few measurements (or the part itself): we'll redraw it in 3D, reinforcing it if needed, then print it in a material suited to its use (PETG, ASA, nylon…) and ship it worldwide.

How it works: save equipment for the price of an unavailable part. For a free quote: on-demand 3D printing.

How does Makers Support work?

Ask your question in the field at the top of this page, with a photo if needed: our AI answers you right away using our articles and FAQ. If the answer isn't enough, one click on "Contact us" and the team takes over. The most helpful questions are then added to the FAQ, without photos or personal information.

Learn all about it: the FAQ & Makers Support in detail.

Where do you ship?

Everywhere! We ship your prints throughout France and worldwide.

How do I contact you?

Through the site assistant, by email at contact@lemondedu3d.com or by phone at 07 44 71 55 14, Monday to Saturday from 8 AM to 7 PM.

All our contact details: contact page.

Questions from makers

🤝 Questions asked by our visitors in , with answers reviewed by the team.

how do I print PETG and PLA?

To print PLA and PETG successfully, here are the key differences to know:

PLA (easier)

  • Prints at low temperature, heated build plate not required
  • Little odor, very minimal warping
  • Ideal for beginners, fine details, and painting

PETG (tougher but demanding)

  • Requires higher nozzle and build plate temperatures
  • Tends to create "spider web" strands (stringing) and sticks strongly to the plate
  • Use a release agent (glue stick) to remove parts easily
  • More resistant to heat, impact, and weather

Which one to choose?

  • PLA: decorative projects, rapid prototypes, getting started
  • PETG: functional parts, robotics, wall mounts, replacement parts

To fine-tune your settings for your specific project, check our filament selector and read the complete guide PLA vs PETG.