Skip to content

Bambu Lab P3C: What We Know About the 2nd Tool Changer Printer

Bambu Lab P3C: What We Know About the 2nd Tool Changer Printer

Update November 3, 2026: the Bambu Lab H3C is official! 9 heads, 2.85 mm head for TPU, heated chamber at 65 °C and priced at 2,499 € in bundle. All specs in our article Bambu Lab H3C official.

While all eyes are on the Bambu Lab H3C, whose presentation is expected November 3, a second machine has just appeared in official documents: the Bambu Lab P3C. It too appears to be equipped with a tool changer. Here's what we know, and what remains to be confirmed.

1. Where Does This Information Come From?

The P3C hasn't been announced by Bambu Lab. It was spotted in two certification files, mandatory before selling an electronic device:

  • a file with the FCC, the US telecommunications authority, approved September 15, 2026;
  • a Japanese certificate (Giteki), issued October 8, 2026.

The machine appears under the reference PF006-P, with photos of the device.

2. What the Photos Show

  • A fully enclosed printer, with a glass door on the front.
  • Seven tool slots aligned at the front of the chamber: the hallmark of a tool changer, like the H3C (which would have nine).
  • A touchscreen and a textured build plate.
  • Power supply and vents at the rear, plus Wi-Fi connectivity.

3. What Remains Unknown

The certification documents confirm the machine exists, but little else. Still unknown:

  • the price and release date;
  • the build volume;
  • the number of usable tools, and whether each slot houses a full head or just a nozzle;
  • compatibility with the AMS and presence of a heated chamber.

The photos and manual remain confidential in the US until March 14, 2027, suggesting the release may not be imminent.

4. A More Affordable Tool Changer Version?

At Bambu Lab, the letter P designates the mid-range lineup, that of the Bambu Lab P2S, while the letter H designates the premium range. So we might imagine an H3C for demanding workshops, and a more accessible P3C for makers. But this is just an educated guess based on the name: Bambu Lab has confirmed nothing.

If this proves true, the tool changer could become far more accessible. That's good news for multi-color and multi-material printing, with far less purging and purge towers than with a single-nozzle system.

Should You Wait Before Buying?

If you were hesitating over a P2S, the question arises. But no date is known, and the release could take several months. Our advice: wait at least for the H3C presentation on November 3, which will give an idea of the pricing and performance of this new generation. We'll update this article as soon as Bambu Lab makes an official announcement.

Share this article

Read also

News & trends: see all articles