Say Goodbye to Warping: Complete 3DLAC Solutions Comparison

Choosing between 3DLAC Spray and 3DLAC Stick primarily depends on your work environment and the precision you need. While the base chemical formula is designed to guarantee perfect hot adhesion and easy cold release, their application methods are radically different.
Here's a comparison to help you select the ideal format for your 3D prints.

π Comparison Table: Spray vs Stick
| Feature | 3DLAC Spray (Aerosol) | 3DLAC Adhesive Stick |
| Application | Wide and fast spray | Foam applicator (precision) |
| Control | Risk of overspray mist | Zero projection, precise targeting |
| Cleaning | Very easy (water or IPA) | Very easy (water) |
| Compatibility | All build plates (Glass, PEI, Mirror) | Ideal for specific areas |
| Odor / Safety | Light odor, flammable | Odor-free, alcohol-free |
| Ideal for... | Large parts, heavy use | Enclosed printers, small spaces |
β 3DLAC Spray (The Classic)
Launched to meet users who don't want spray mist in their workshop or machine.
-
Advantages:
-
Cleanliness: No particles fly around. You can apply it directly inside a closed printer without risk to the mechanics.
-
Targeted application: Perfect if you're only printing a small part at the center of the build plate.
-
Alcohol-free formula: Safer to store and often approved for international shipments more easily.
-
-
Disadvantages:
-
Thickness: It can sometimes leave a slightly thicker or uneven layer if you press too hard on the applicator.
-
Partner Link π https://amzn.to/4pFggFq

β 3DLAC Stick (The Precision)
The possibilities are limited only by your patience and imagination:
-
Artistic creation: Sculptures, figurines, custom jewelry, or Christmas decorations.
-
Object repair: Fill a crack in a plastic object or reinforce a broken part.
-
3D printing complement: Ideal for hiding joints between two printed pieces or correcting small defects.
-
Education: Teach spatial geometry to children in a fun way.
Partner Link π https://amzn.to/3LJjda9

π‘ Our Maker's Advice
-
If you have a removable build plate (PEI or glass type): Go for the Spray. Remove the plate from the printer, give it a quick spray, and pop it back in. It's the most efficient.
-
If your build plate is fixed or your printer is in an enclosure: The Stick is much better suited. It prevents polluting the air and jamming your axes with adhesive residue.
-
For technical materials (ABS, ASA): The spray tends to provide slightly more uniform release force across large areas, further reducing warping (corner lift).
Maintenance
In both cases, 3DLAC is water-soluble. A simple damp cloth or a bit of isopropyl alcohol (IPA) is enough to restore your build plate to like-new condition.




