Filament Selector
Which 3D filament should you choose?
Check what your part needs: our selector compares 12 filaments (PLA, PLA-CF, PETG, ABS, HIPS, ASA, TPU, Nylon, Nylon PA-CF, polycarbonate, PVB and PVA) and immediately points you to the right filament for your requirements.
My printer (optional filter)
Your part must…
➕ More criteria aesthetics, chemistry, water, friction, ecology, transparency, speed, smoothing, supports
No FDM-printed part is truly « food-safe »: ridges between layers trap bacteria, dyes aren't always certified, and a brass nozzle may contain lead.
- Filament certified for food contact (EU regulation 10/2011), without questionable dyes
- Stainless steel nozzle, clean and dedicated to this use
- Brief contact with dry foods only: cookie cutters, cookie stamps
- Hand wash with warm water, never in a dishwasher (PLA softens at 55-60 °C)
- Not for repeated use for drinking, storage, or cooking
All details in our filament FAQ.
Select one or more criteria: filaments will rank automatically.
PLA The standard filament
Easy, precise, odorless, and available in hundreds of colors. Perfect for decorative parts, miniatures, prototypes, and cookie cutters (brief contact, with food-contact certified PLA). It softens around 55-60 °C: avoid direct sunlight or hot car interiors.
- ☀️ UV resistance / outdoor use
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Impact resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic / decorative finish
- 🧪 Chemical resistance
- 💧 Water tightness / water contact
- 🌱 Eco-friendly
- 💡 Transparency / light
- ⚡ Fast printing
- ✨ Chemical smoothing
- Nozzle
- 190-220 °C
- Build plate
- 50-60 °C
- Enclosure
- No
- Approximate price
- 18-25 €/kg
Perfect for: Decorative parts, miniatures, prototypes, cookie cutters
PLA-CF Rigid PLA with matte finish
Carbon fiber-filled PLA: significantly more rigid and stable than standard PLA, with virtually no warping, and a stunning matte appearance that hides layer lines. It remains easy to print, but it wears brass nozzles: switch to a hardened steel nozzle. Its heat resistance remains that of PLA.
- ☀️ UV Resistance / Outdoor
- 🌀 Flexibility
- 🔥 Heat Resistance
- 💪 Impact Resistance
- 🍪 Food Contact
- 👌 Ease of Printing
- 🎨 Aesthetic Finish / Decor
- 🧪 Chemical Resistance
- 💧 Waterproofing / Water Contact
- ⚙️ Friction / Wear
- 🌱 Eco-Responsible
- ⚡ Fast Printing
- Nozzle
- 200-230 °C
- Build Plate
- 50-65 °C
- Enclosure
- No
- Approximate Price
- 30-45 €/kg
Ideal for: Rigid supports, fixtures, drones, cosplay parts, prototypes
PETG The Everyday Workhorse
More impact-resistant, heat-resistant, and moisture-resistant than PLA, while remaining easy to print without an enclosure. Perfect for practical household parts, supports, enclosures, and occasional food contact.
- ☀️ UV Resistance / Outdoor
- 🌀 Flexibility
- 🔥 Heat Resistance
- 💪 Impact Resistance
- 🍪 Food Contact
- 👌 Ease of Printing
- 🎨 Aesthetic Finish / Decor
- 🧪 Chemical Resistance
- 💧 Waterproofing / Water Contact
- ⚙️ Friction / Wear
- 🌱 Eco-Responsible
- 💡 Transparency / Light
- ⚡ Fast Printing
- Nozzle
- 220-245 °C
- Build Plate
- 70-90 °C
- Enclosure
- No
- Approximate Price
- 20-25 €/kg
Ideal for: Functional parts, supports, enclosures, kitchen items
ABS The Rugged Classic
The plastic used in building bricks and car interior parts: strong, impact-resistant, and heat-resistant (around 95-100 °C), easy to sand and smooth with acetone. It shrinks as it cools: a closed enclosure and proper ventilation are strongly recommended. It yellows in sunlight; prefer ASA for outdoor use.
- ☀️ UV Resistance / Outdoor
- 🌀 Flexibility
- 🔥 Heat Resistance
- 💪 Impact Resistance
- 🍪 Food Contact
- 👌 Ease of Printing
- 🎨 Aesthetic Finish / Decor
- 🧪 Chemical Resistance
- 💧 Waterproofing / Water Contact
- ⚙️ Friction / Wear
- 🌱 Eco-Responsible
- ⚡ Fast Printing
- ✨ Chemical Smoothing
- Nozzle
- 230-250 °C
- Build Plate
- 90-110 °C
- Enclosure
- Yes
- Approximate Price
- 18-25 €/kg
Ideal for: Mechanical parts, enclosures, functional prototypes (indoor)
HIPS The Lightweight, ABS's Perfect Partner
Impact polystyrene: lightweight, rigid, and impact-resistant, it sands, glues, and paints very easily. It's primarily used as a support material for ABS because it dissolves in limonene, and it's also great for models and lightweight enclosures. It prints like ABS: a closed enclosure and proper ventilation are recommended.
- ☀️ UV Resistance / Outdoor
- 🌀 Flexibility
- 🔥 Heat Resistance
- 💪 Impact Resistance
- 🍪 Food Contact
- 👌 Ease of Printing
- 🎨 Aesthetic Finish / Decor
- 🧪 Chemical Resistance
- 💧 Waterproofing / Water Contact
- 🌱 Eco-Responsible
- 💡 Transparency / Light
- ⚡ Fast Printing
- ✨ Chemical Smoothing
- 🧩 Soluble Supports
- Nozzle
- 220-250 °C
- Build Plate
- 90-110 °C
- Enclosure
- Yes (Recommended)
- Approximate Price
- 20-30 €/kg
Ideal for: Soluble supports for ABS, models, lightweight enclosures, parts to be painted
TPU The Flexible Filament
Elastic and virtually unbreakable: it flexes, absorbs impact, and returns to its original shape. The obvious choice for cases, gaskets, tires, protective covers, and bracelets. It prints slowly and prefers a direct-drive extruder.
- ☀️ UV Resistance / Outdoor
- 🌀 Flexibility
- 🔥 Heat Resistance
- 💪 Shock resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decorative
- 🧪 Chemical resistance
- 💧 Waterproofing / water contact
- 🌱 Eco-responsible
- 💡 Transparency / light
- ⚡ Fast printing
- Nozzle
- 210-240 °C
- Build plate
- 30-60 °C
- Enclosure
- No
- Approximate price
- 25-40 €/kg
Ideal for: Shells, gaskets, tires, shock absorbers, bracelets
ASA The outdoor champion
UV resistant, it won't yellow or become brittle in the sun. It withstands up to 95-100 °C and handles rain and frost: ideal for automotive, motorcycle, and garden applications. Best printed in an enclosed printer with good ventilation.
- ☀️ UV / outdoor resistance
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Shock resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decorative
- 🧪 Chemical resistance
- 💧 Waterproofing / water contact
- ⚙️ Friction / wear
- 🌱 Eco-responsible
- ⚡ Fast printing
- ✨ Chemical smoothing
- Nozzle
- 240-260 °C
- Build plate
- 90-110 °C
- Enclosure
- Yes
- Approximate price
- 25-35 €/kg
Ideal for: Automotive, motorcycle, garden, outdoor housings
Nylon (PA) The wear-resistant choice
Tough, slightly flexible, and highly abrasion resistant: the material for gears, hinges, and parts under friction. It absorbs moisture from the air quickly: dry it before each print and store it in a dry container. An enclosed printer limits bed adhesion issues.
- ☀️ UV / outdoor resistance
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Shock resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decorative
- 🧪 Chemical resistance
- ⚙️ Friction / wear
- 🌱 Eco-responsible
- 💡 Transparency / light
- ⚡ Fast printing
- Nozzle
- 240-270 °C
- Build plate
- 70-100 °C
- Enclosure
- Yes
- Approximate price
- 35-60 €/kg
Ideal for: Gears, hinges, clips, moving parts subject to wear
Nylon PA-CF The high-performance technical choice
Nylon reinforced with carbon fiber: very rigid, lightweight, and heat resistant, with a beautiful matte finish. Reserved for demanding mechanical parts. Requires a hardened steel nozzle, well-dried filament, and ideally an enclosed printer.
- ☀️ UV / outdoor resistance
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Shock resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decorative
- 🧪 Chemical resistance
- ⚙️ Friction / wear
- 🌱 Eco-responsible
- ⚡ Fast printing
- Nozzle
- 260-290 °C
- Build plate
- 80-100 °C
- Enclosure
- Yes
- Approximate price
- 50-80 €/kg
Ideal for: Mechanical parts, drones, tools, motor mounts
Polycarbonate (PC) The most resistant
The strongest of common filaments: excellent shock resistance, great rigidity, and withstands up to 110-120 °C. Available in a transparent version. Reserved for enclosed printers capable of reaching 300 °C, with a hot build plate and dried filament.
- ☀️ UV / outdoor resistance
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Shock resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decorative
- 🧪 Chemical resistance
- 💧 Waterproofing / water contact
- ⚙️ Friction / wear
- 🌱 Eco-responsible
- 💡 Transparency / light
- ⚡ Fast printing
- Nozzle
- 260-300 °C
- Build Plate
- 90-120 °C
- Enclosure
- Yes (required)
- Approximate Price
- 30-50 €/kg
Ideal for: Rigid technical parts, protective housings, tools
PVB The filament that smooths with alcohol
It prints almost like PLA, with very little odor, but it has a unique advantage: a few passes of isopropyl alcohol are enough to erase layer lines and get a smooth, glossy surface, without acetone. Translucent versions become nearly transparent. It fears heat like PLA and remains sensitive to moisture.
- ☀️ UV / outdoor resistance
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Impact resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decor
- 🧪 Chemical resistance
- 💧 Water resistance / water contact
- 🌱 Eco-friendly
- 💡 Transparency / light
- ⚡ Fast printing
- ✨ Chemical smoothing
- Nozzle
- 190-220 °C
- Build Plate
- 40-60 °C
- Enclosure
- No
- Approximate Price
- 35-55 €/kg
Ideal for: Figurines, vases, lamps and decorative objects with smooth or glossy finish
PVA / BVOH The soluble support
This is not a filament for your final parts: it serves as a support that dissolves in water. Used with PLA (PVA) or PETG and ABS (BVOH) on a multi-material printer, it enables impossible shapes otherwise: cavities, interlocking gears, overhangs. Very sensitive to moisture.
- ☀️ UV / outdoor resistance
- 🌀 Flexibility
- 🔥 Heat resistance
- 💪 Impact resistance
- 🍪 Food contact
- 👌 Ease of printing
- 🎨 Aesthetic finish / decor
- 🧪 Chemical resistance
- 🌱 Eco-friendly
- 💡 Transparency / light
- ⚡ Fast printing
- 🧩 Soluble supports
- Nozzle
- 180-210 °C
- Build Plate
- 50-60 °C
- Enclosure
- No
- Approximate Price
- 60-100 €/kg
Ideal for: Water-soluble supports for complex geometries
The comparison at a glance
| Criteria | PLA | PLA-CF | PETG | ABS | HIPS | TPU | ASA | Nylon (PA) | Nylon PA-CF | Polycarbonate (PC) | PVB | PVA / BVOH |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ☀️ UV / Outdoor Resistance | ||||||||||||
| 🌀 Flexibility | ||||||||||||
| 🔥 Heat Resistance | ||||||||||||
| 💪 Impact Resistance | ||||||||||||
| 🍪 Food Contact | ||||||||||||
| 👌 Ease of Printing | ||||||||||||
| 🎨 Aesthetic / Decorative Finish | ||||||||||||
| 🧪 Chemical Resistance | ||||||||||||
| 💧 Waterproofing / Water Contact | ||||||||||||
| ⚙️ Friction / Wear | ||||||||||||
| 🌱 Eco-Friendly | ||||||||||||
| 💡 Transparency / Light | ||||||||||||
| ⚡ Fast Printing | ||||||||||||
| ✨ Chemical Smoothing | ||||||||||||
| 🧩 Soluble Supports | ||||||||||||
| 🌡️ Nozzle | 190-220 °C | 200-230 °C | 220-245 °C | 230-250 °C | 220-250 °C | 210-240 °C | 240-260 °C | 240-270 °C | 260-290 °C | 260-300 °C | 190-220 °C | 180-210 °C |
| 📦 Enclosed Chamber | No | No | No | Yes | Yes (recommended) | No | Yes | Yes | Yes | Yes (required) | No | No |
| 💶 Approximate Price | $20-28/kg | $33-50/kg | $22-28/kg | $20-28/kg | $22-33/kg | $28-44/kg | $28-39/kg | $39-67/kg | $56-89/kg | $33-56/kg | $39-61/kg | $67-111/kg |
Ratings from 1 (poor) to 5 (excellent), provided for reference only: they vary by brand and formulation. Food contact: only for brief contact with dry foods, with certified filament (EU regulation 10/2011), stainless steel nozzle, and hand washing.
Temperatures and settings for major filaments
Starting adjustment ranges to print each material properly, to refine based on your spool's brand (the recommended temperature is printed on the label).
| Filament | Nozzle Temp. | Bed Temp. | Difficulty | Mechanical Strength | Enclosure Recommended | Ideal Use / Applications |
|---|---|---|---|---|---|---|
| PLA | 190 - 220 °C | 50 - 60 °C | Very easy | Low to moderate | No | Decoration, models, visual prototypes, figurines |
| PLA-CF | 200 - 230 °C | 50 - 65 °C | Easy (hardened steel nozzle) | Good (very rigid) | No | Rigid supports, fixtures, drones, cosplay, matte finish prototypes |
| PETG | 220 - 245 °C | 70 - 90 °C | Easy to intermediate | Good | No | Functional parts, supports, enclosures, airtight containers |
| ABS | 230 - 250 °C | 90 - 110 °C | Intermediate | Good | Yes (strongly recommended) | Mechanical parts, enclosures, functional prototypes (indoor use) |
| HIPS | 220 - 250 °C | 90 - 110 °C | Intermediate | Moderate (good impact resistance) | Yes (recommended) | Soluble supports (limonene) for ABS, models, lightweight parts to paint |
| ASA | 240 - 260 °C | 90 - 110 °C | Intermediate | Good | Yes (strongly recommended) | Outdoor parts, UV and weather resistance |
| TPU / TPE | 210 - 240 °C | 30 - 60 °C | Intermediate / slow | Flexible / elastic | No | Protective cases, phone covers, gaskets, soles, flexible parts |
| Nylon (PA) | 240 - 270 °C | 70 - 100 °C | Difficult | Excellent | Yes | Gears, hinges, moving parts subject to wear |
| Polycarbonate (PC) | 260 - 300 °C | 90 - 120 °C | Advanced | Excellent | Yes (mandatory) | Rigid technical parts, protective housings, industrial tooling |
| PVB | 190 - 220 °C | 40 - 60 °C | Very easy | Moderate | No | Decorative parts smoothed with isopropyl alcohol, glossy finish |
| PVA / BVOH | 180 - 210 °C | 50 - 60 °C | Easy | Fragile | No | Water-soluble support materials (for complex geometries) |
Tip: print a "temperature tower" to find the ideal setting for each new spool. For ABS, ASA, and PC, ventilate the room during printing.
Filament brands to know
Once you've chosen your material, it's time to find the right spool. Here are the brands you'll encounter most often, from consumer brands to French manufacturers.
Buy filament at the best price
Major mainstream brands Very popular and easy to find
Polymaker
PolyLite, PolyTerra (matte), PolyMax and Panchroma ranges: a reference in consistency and finishes.
eSUN
Very wide selection of PLA+, PETG, ABS and resins, at affordable prices.
Bambu Lab
PLA Basic, Matte, Tough… spools designed for AMS and high-speed printers.
Sunlu
Excellent value for money and very wide range of finishes (Silk, Marble, Meta).
Jayo
Sister brand to Sunlu, budget-oriented, with widely distributed spools.
Creality
The printer manufacturer also offers its filaments, including the Hyper PLA range for high-speed printing.
Elegoo
Affordable and reliable filaments, including the Rapid range for high-speed printing.
Overture
Appreciated for its consistency and cardboard spools.
Hatchbox
Historic American brand, renowned for the consistency of its PLA.
Amazon Basics
Budget entry-level
Market standards (PLA, PETG, TPU, ABS), generally produced by major Chinese extruders. An economical emergency solution for prototyping without aesthetic requirements.
GEEETECH
Historic Chinese brand in the maker world
Printers and consumables, very popular for its standard PLA and two or three-color Silk PLA. Excellent quantity-to-price ratio and consistent diameter on recent vacuum-sealed ranges.
TINMORRY
Mainstream, excellent value for money
Appreciated by European makers for the consistency of its matte PLA, its PETG and its cardboard spools. Clean winding and stable extrusion.
iSANMATE
Specialist in visual effects
Phosphorescent filaments, color-changing with heat or UV, marble, wood and sparkling silk finishes. Ideal for decoration and figurines rather than technical parts.
DEEPLEE
Budget
Generic brand offering mainly standard PLA and sample packs or refills for 3D pens. Practical for getting started or testing colors.
Specialized, premium & European brands Technical materials and advanced quality control
Prusament
Prusa Research's filament: very strict diameter tolerance and traceability for each spool.
Formfutura
Dutch brand focused on quality, composites and eco-responsibility.
BASF Forward AM
Engineering materials from German industrial chemistry, for demanding parts.
ColorFabb
Dutch manufacturer renowned for its composites (LW-PLA, bronze or copper-loaded).
Rosa3D
Polish manufacturer with extensive catalog, from PLA to technical materials.
Verbatim
Historic mainstream brand, with consistent and easy-to-find filaments.
Recreus
Spanish specialist in flexible materials, with its Filaflex range.
NinjaTek
Famous for its very flexible TPU (NinjaFlex) and technical elastomers.
Kexcelled
Refined filaments, particularly TPU and matte finishes.
Spectrum
Polish manufacturer offering a very wide range of colors and materials.
WINKLE
Spanish manufacturer, quality and eco-responsibility
Spanish production with strict tolerances (± 0.03 mm). Recognized for its PLA HD and Replay recycled range.
IEMAI
Technical and high-performance materials
Beyond PLA and PETG, its core business: carbon composites (PLA-CF, PETG-CF, PA-CF), PC and advanced thermoplastics (PEEK, PEI).
OVV3D
Specialist in multicolor effects
Very visible for its two and three-color Silk PLA with chameleon or gradient effects. Refined filament and well-wound, designed for the glossiness of vases and art objects.
French manufacturers & brands Made or designed in France
Nanovia
Technical and composite filaments, manufactured in Brittany.
Arianeplast
Made in France: PLA, PETG, ABS, ASA and recycled filaments.
Capifil
Industrial extruder from Isère: standard, technical and bio-based ranges.
Kimya
Industrial and highly technical filaments, subsidiary of Nantes-based Armor group.
Dagoma
French pioneer of 3D printing, with its own filaments, including recycled ranges.
LV3D
French manufacturer of 3D printer filaments.
Forshape
French brand of filaments.
Ecofil3D
French filament brand with eco-responsible focus.
Accessories that make all the difference
Still hesitant? Describe your part: we advise you on the right material, or we print it for you.
Amazon links are affiliate links (see our Terms and Conditions). Also read: our practical guide to choosing your filament, the world of 3D filaments, which filament for strong parts and our filament FAQ.
The information on this page (ratings, temperatures, resistances, prices, uses) is provided for informational purposes only. It may vary significantly depending on the brand, formulation, color and batch of filament, as well as your printer, your settings and printing environment. Always refer to the manufacturer's recommendations indicated on the spool and conduct tests before any critical use.
Le Monde du 3D cannot be held responsible for a poor choice of material, print failure, material or physical damage, or the use made of printed parts, particularly for food contact, mechanical parts, safety components or parts exposed to heat. Amazon prices and products are subject to change at any time.
Did you spot an error or information to correct? , we'll update the page.
