Skip to content

Lynxel LynChrom LC1: Vatless, Full-Colour Resin 3D Printing Steals the Show at Formnext 2026

Lynxel LynChrom LC1: Vatless, Full-Colour Resin 3D Printing Steals the Show at Formnext 2026

Among all the launches on show at Formnext 2026 in Frankfurt (17–20 November), one young brand caught everyone off guard in the resin space: Lynxel, with its LynChrom LC1. Instead of single-colour parts you then have to prime and hand-paint for hours, the LC1 prints directly in colour, while doing away with the traditional liquid resin vat.

1. Goodbye Resin Vat: Membrane-Based LMS Technology

A traditional resin printer (MSLA) exposes the resin through an LCD screen placed under a vat. Lynxel drops this principle in favour of a new process called LMS (Layered Membrane Stereolithography):

  • Cartridge and membrane feed: the resin is stored in a sealed cartridge with a material ID chip. It is spread in a thin layer on a moving membrane that carries it to the exposure area.
  • Linear laser curing: a scanning optical module (Linear Scanning Unit) exposes each layer at 600 dpi through the membrane.
  • Far fewer hassles in the workshop: with no open vat, there are fewer odours, no resin to filter after a failure and no wasted leftovers at the bottom of the vat. Lynxel says a print can start with just 5 g of resin, and the machine handles very viscous resins up to 300,000 cP (rigid, flexible or composite).

2. CMYK Colour Printing at 1200 dpi, Layer by Layer

The LynChrom LC1 is the colour version of the monochrome LynBeam LB1. It adds a high-definition inkjet module synchronised with curing:

  • Colour built in during printing: on each 50 µm layer, the module deposits water-based CMYK inks at 1200 dpi directly onto the resin. Lynxel claims up to 10 million colours.
  • Textures, gradients and lettering without paint: patterns, textures and technical markings are locked straight into the part. No more need to hand-paint your miniatures: post-processing comes down to the usual cleaning and UV post-curing.

3. Specifications and Launch Timeline

FeatureLynxel LynChrom LC1
TechnologyLMS (membrane stereolithography) + colour inkjet
Build volumeAround 200 × 350 × 300 mm (figures still vary between sources; 200 × 400 × 300 mm for the monochrome LB1)
Laser resolution / layer thickness600 dpi / 50 µm
Colour systemWater-based CMYK inkjet, 1200 dpi
Material feedCartridges with ID chip, viscosity up to 300,000 cP
Features5-inch touchscreen, dual-band Wi-Fi, 1080p camera, Lynxel Studio software
AvailabilityKickstarter planned for December 2026 (or January 2027), first deliveries targeted around May 2027

The price hasn’t been announced yet: Lynxel will reveal it just before the campaign opens.

Our Take: The Boldest Promise of the Year

Until now, colour resin printing was the preserve of very expensive industrial machines. By combining a clean, material-efficient vatless system with a 1200 dpi inkjet head in a generous desktop format, Lynxel may have found the missing link for miniature makers and product designers. We’ll have to wait for the price and the first independent tests, and bear in mind that a first product launched through crowdfunding always carries some risk. For the other launches at the show, read our Formnext 2026 report.

Share this article

Read also

News & trends: see all articles