Elegoo Centauri X Ultra: 4 Independent Toolheads and Built-In Dryer Boxes to Bury Purging

After shaking up the entry-level enclosed market with its Centauri Carbon series (see our article on the Centauri Carbon 2 Combo), Elegoo is going on the offensive in the most hotly contested segment of the year. Unveiled at Formnext 2026 in Frankfurt (17–20 November), the Centauri X Ultra marks the brand’s entry into desktop toolchanger printers, with a spec sheet designed as much for waste-free multicolour as for technical multi-material printing.
The specifications below come from the panel displayed on Elegoo’s booth and may still change before release.
1. Four Independent Toolheads and 5-Second Changes
Where traditional single-nozzle multi-spool systems purge filament at every transition, the Centauri X Ultra carries four independent toolheads, each with a dual-gear direct drive extruder (7:1 ratio).
- Zero purge with up to 4 colours or materials: each toolhead has its own filament path. Switching tools is quoted at 5 seconds, with no purge tower, as long as each toolhead keeps a single colour.
- Rigid and flexible in the same part: with a dedicated nozzle for each material, it becomes clean and reliable to combine PLA or PETG with flexible TPU or a support material, without contaminating the hotend.
- Expandable to 20 colours: Elegoo announces compatibility with its AFS system to feed the toolheads and reach up to 20 colours. In that case, each toolhead swaps filament again, and some purging comes back.
2. Two Built-In Dryer Boxes on the Sides
The other nice surprise on Elegoo’s booth: the Centauri X Ultra comes with two clear side compartments as standard, one on the left and one on the right, each holding two spools.
- Active drying up to 65 °C: no more stacking external dryers on the workbench. Spools stay dry for the whole print, a real advantage for PETG, TPU and nylon. For the right temperature for each material, check our filament drying settings selector.
- Automated handling: the boxes recognise spools via RFID tags and handle automatic filament loading and recovery.
3. Specifications: Ready for Engineering Materials
| Feature | Elegoo Centauri X Ultra |
|---|---|
| Build volume | 256 × 256 × 256 mm |
| Multi-tool system | 4 independent toolheads (~5 s change) |
| Max. nozzle / bed temperature | 350 °C / 120 °C |
| Max. print speed | 500 mm/s |
| Storage and drying | 2 side boxes (4 spools in total) heated up to 65 °C, RFID |
| Compatible materials | PLA, PETG, TPU, ABS, PA, PC |
| Comfort | Auto calibration, active vibration compensation, quiet mode, 5-inch flip-up touchscreen |
| Dimensions (with boxes) | 613 × 462 × 510 mm |
The printer comes fully enclosed, top cover included. Elegoo hasn’t said whether the chamber is actively heated.
Price and Availability: What We Know
Elegoo announced neither the price nor the release date during the show. According to reports from the specialist press in Frankfurt, the brand is aiming for a launch in the first quarter of 2027, under ,000. To be confirmed.
Our Take: The All-in-One Combo the Workshop Was Missing?
With the Centauri X Ultra, Elegoo ticks almost every box for a maker in 2027: an enclosed machine that reaches 350 °C at the nozzle and 120 °C on the bed, four true independent toolheads to combine rigid and flexible without waste, and active drying included out of the box. If the final price stays well under ,000, competition among desktop toolchangers is going to heat up seriously, against the Bambu Lab H3C or the Co Print Quadro (see our Formnext 2026 report).




