Skip to content

QIDI Tech Q3D: Dual Nozzles and a 70 °C Heated Chamber for Under $600

QIDI Tech Q3D: Dual Nozzles and a 70 °C Heated Chamber for Under $600

Unveiled at Formnext 2026 in Frankfurt (17–20 November), the new QIDI Q3D makes a big splash in the enclosed FDM printer market. Rather than relying solely on a traditional purging multi-spool system, QIDI Tech fits two independent hotends on a single toolhead, at a list price of $599 ($529 on pre-order).

Its spec sheet is built for makers who want to cut waste in two-colour printing and print mechanical parts in engineering materials.

1. Two Independent Nozzles for Hassle-Free Printing

The Q3D’s headline feature is its dual-nozzle design: each nozzle has its own hotend and its own filament path, with fully separate temperature control. Both hotends sit on a new, lighter toolhead.

  • Far less purging: for two-colour prints or prints with a dedicated support material (HIPS or soluble filament), the machine simply switches from one nozzle to the other, without flushing the nozzle between materials. Beyond two filaments, with the multi-spool unit, regular purging comes back.
  • Up to 350 °C: the main nozzle uses QIDI’s quick-release hotend and reaches 350 °C, opening the door to demanding engineering materials: nylon (PA), polycarbonate (PC) and carbon- or glass-fibre-filled filaments.
  • Actively cooled extruder: dedicated air cooling limits heat creep and reduces the risk of clogs during long prints in an enclosed chamber.

2. A 70 °C Heated Chamber, QIDI’s Favourite Playground

True to its reputation for engineering materials (see our overview of the QIDI Tech brand), the Q3D features an actively heated chamber up to 70 °C, using the brand’s fourth-generation chamber heater, and a bed that reaches 120 °C.

  • Much less warping on ABS, ASA and nylon: a stable chamber temperature improves layer adhesion and limits lifting or cracking on large technical parts.
  • Three-stage filtration: for worry-free printing at home or in the office, the machine combines a G3 pre-filter, an H12 HEPA filter and activated carbon. QIDI claims it captures 99.5% of fine particles and reduces odours.

3. Specifications and Launch Price

FeatureQIDI Q3D
Build volume (main nozzle)260 × 260 × 260 mm
Build volume (dual-nozzle mode)240 × 260 × 255 mm
Max. nozzle / bed / chamber temperature350 °C / 120 °C / 70 °C
Motion systemCoreXY, linear rail on the X axis, up to 600 mm/s
LevellingEddy current sensor built into the nozzle
FiltrationG3 pre-filter + H12 HEPA + activated carbon
Price$599 ($529 on pre-order, with a refundable $30 deposit)

Pre-orders are open on QIDI’s official store. First deliveries are expected around three months after full payment.

Our Take: Who Is the Q3D For?

With the Q3D, QIDI Tech isn’t chasing multicolour records with 8 or 16 spools for decorative miniatures: the brand is clearly targeting “functional” makers and mechanical prototyping. Combining a high-strength engineering filament (ASA-CF, PA-CF, PETG-GF) with a dedicated support material, all in a chamber heated to 70 °C for under $600, makes it one of the most coherent offerings of late 2026. For the other launches at the show, read our Formnext 2026 report.

Share this article

Read also

News & trends: see all articles