Skip to content

InfiMech MX and MX Pro: the Kickstarter for Multi-Head Printing Without Purge Towers

InfiMech MX and MX Pro: the Kickstarter for Multi-Head Printing Without Purge Towers

The essentials in a nutshell

  • Tool changer: up to 8 independent heads, instead of running all filaments through a single nozzle.
  • Almost no waste: just one small priming drop per head, and no purge tower.
  • Cutting-edge tech at this price: induction-heated heads, closed-loop motors to prevent layer shifts, AI-powered error detection via camera.
  • Built for technical materials: heated chamber up to 65 °C on the Pro model, 8 mm cast aluminum build plate, air filtration.
  • Aggressive pricing: starting at $299 for the MX and $549 for the MX Pro in "super early bird" pricing on Kickstarter.

On consumer-grade 3D printers, multi-color printing almost always relies on a single nozzle fed by a filament selector. Every time the color changes, the machine must purge a large amount of material: prints take longer and a waste tower builds up. We first covered this product line in June in our article InfiMech MX and MX Pro, the New Era of Multi-Head Printing; the Kickstarter campaign is now live with final pricing and specs.

YouTube video: InfiMech MX presentation

Independent heads: goodbye purge towers

The MX Pro packs up to 8 independent print heads, each with its own filament:

  • No repeated purging: each nozzle primes just once, on first use. For an 8-color or multi-material model, the machine discards only 8 small drops total.
  • True multi-material: materials never share the same nozzle. You can combine plastics that are normally incompatible: rigid PLA parts with flexible TPU hinges (up to 75A according to InfiMech), or water-soluble PVA supports.
  • Fast tool changes: InfiMech claims around 4 seconds per head change with no color mixing.

Induction heating, closed-loop control, and speed

To make tool changes seamless, InfiMech relies on several technical solutions:

  • Induction heating: idle heads stay cool and heat up in just seconds when selected. The transfer happens wirelessly, eliminating electrical connectors prone to wear or fouling.
  • Closed-loop motors (on the MX Pro): sensors monitor position in real time and correct drift after impacts, preventing layer shifts.
  • Speed: up to 600 mm/s and 30,000 mm/s² acceleration promised, with an accelerometer for input shaping, which eliminates ringing on walls.

Safety and AI-powered camera monitoring

  • AI-powered spaghetti detection: immediate shutdown if extrusion happens mid-air or the print detaches.
  • Obstacle detection: the camera spots a forgotten tool on the build plate (a spatula, for example) before printing starts.
  • Clog and knot detection: spots plastic buildup around the nozzle and monitors filament tension to catch tangled spools.
  • Power-loss recovery.

MX or MX Pro: comparison

FeatureInfiMech MXInfiMech MX Pro
Number of headsUp to 6Up to 8
Build volume220 × 220 × 220 mm300 × 300 × 300 mm
ChamberOpenEnclosed, heated to 65 °C
Build plate8 mm cast aluminum, up to 110 °C8 mm cast aluminum, up to 110 °C
Air filtration and AI cameraOptionalIncluded
Display4.3-inch touchscreen5-inch tilting touchscreen
Kickstarter priceStarting at $299 (then $379–$429)Starting at $549 (then $599–$749)

For comparison, the Bambu Lab H3C with 9 heads starts at €2,499 in a bundle. InfiMech's prices are spectacularly low—so much so that part of the community wonders how they can hit those numbers.

Before backing the project: our advice

As of November 10, the campaign had already raised about $1.4 million from over 2,000 backers toward a $51,000 goal. It runs through December 10. Keep in mind, though, that crowdfunding isn't the same as shopping in a store:

  • announced specs haven't yet been verified by independent tests on production units;
  • delivery timelines can slip, and warranties aren't the same as a retailer's;
  • more heads also means more nozzles to maintain and calibrate.

InfiMech, a subsidiary of Chinese manufacturer Flying Bear, has already shipped its TX model, which is reassuring. To weigh the pros and cons, also read our article on Kickstarter and 3D printer makers.

👉 See the InfiMech MX Kickstarter campaign

Share this article

Read also

News & trends: see all articles